Power Meter

HLP-200B hand-held power meter specially designed for measuring super low power CO2 laser tube. Small size, easily carried, built in button battery, convenient to use; easy to read, High measuring accuracy.

Product name: Hand-held power meter

Model: HLP-200B

Measuring scope: 0-200W

Aligned wavelength: 10.6μm

Battery: 3v/3.6v 2032 button battery

HLP-200B is the upgrade version base on HLP-200,

it still maintains the feature of super low power consumption but also with an improved way of working.

It stands by as soon as it turns on, and begins measuring power when the laser is emitted to the sensor. To achieve better accuracy, the sensor area is decreased in this upgrade.

Another screw hold (M4) has been added to the side of the power meter to mount the bracket to reduce the error caused by the user's deviation during measurement.

In order to facilitate the user to replace the battery, this upgrade changes the position of the battery and the battery cover open way. Users can easily replace the battery without any tools.

Status instruction codes are added: “_ _ _ _” blinks represent the power meter is standing by.

”HOT” tells the power meter is over heated. “Err” means the measured item is beyond the measuring scope of the power meter.  

  Operation instructions

1.         Press the blue button to turn on and the screen tells “_ _ _ _”. With a sound instruction after 0.5seconds the screen goes to blinking “_ _ _ _” which is stand by mode. Ensure the measured laser is emitted to the center of the sensor, measurement will be started when the sensor is receiving laser and the “_ _ _ _” stops blinking on the screen. When the screen stops blinking and comes with a sound instruction, the measurement has started.

2.         By the end of the measurement, the screen tells the power reading and comes with a sound instruction, the status stays 6 seconds. The equipment will shutdown when another sound instruction rises. 3.         When the screen display “Hot” and comes with a sound instruction, the sensor is over heated and requires a cool down prior to another measurement.

4.         When the screen display ”Err” and comes with a sound instruction, the measured power is beyond the measuring scope of this power meter.

5.         Use fingers to remove the battery cover then easily replace battery.